
Specifications | |
Business section |
Specifications | |
Suggested Link Details/Purchase | |
Content | 3 3.2Parameterizing using the ”SimoCom U” tool 3-119 Siemens AG 2003 All rights reservedSIMODRIVE POSMO SI/CD/CA User Manual (POS3) – 07.03 Edition Table 3-1Information on ”SimoCom U”, continued FunctionDescription Working online. this means that you are connected with one or several POSMO SI or POSMO CD/CA drives, and ”SimoCom U” also recognizes these drives. This is the case, if ”SimoCom U” has already searched the interface. You are online, if Select with “Go online” In the online mode, the opened files and all of the drives available at the interface, are included in the drive selection box of the toolbar. Recommended interface setting: If you start ”SimoCom U” for the first time, you will be prompted for the interface pre–setting (default): If you mainly work in the office, then select “Work offline”. If you mainly work at the machine, then select “Connect via” and the serial interface at your computer. Note: Not all of the parameters displayed via ”SimoCom U” are cyclically read. Remedy: After you have changed parameters via PROFIBUS–DP, you should first go offline with ”SimoCom U” in order to re–establish online operation with updated data. Working in the drive or in the file You can work directly in the drive or only on a PC – however, only with one data set at any one time. Parameter files which have been opened, can also be closed again: “File/close file” menu. Expert list. displays all of the POSMO SI or POSMO SCD/POSMO CA parameters. You can individually change every parameter via the expert list. There is no additional support for the operator here. This list parameterization should only be used in exceptional cases. Operating Instructions –Call: “Start–up/Additional parameters/Expert list” menu –If you open the list, you additionally obtain the ”List” menu which can also be reached via the righthand mouse key. –It is especially interesting that the standard value and value limits for the actual parameters are displayed in the status line. –Values which have been changed only become active, after the input key is pressed, or another parameter was selected. Values which are inactive, have a red background. –In the “List” menu, you can select a way how data should appear in the list: All, or only the controller data, or only the sub–parameter set 0 or . Furthermore, you can search for specific terms with F3 (or list/search menu), e.g. you can search for ”temp” if you wish to change the temperature alarm threshold value. –Bit–coded values: With the cursor, go to the line and press F4 (or list/bit value menu); you then obtain the plain text display of the individual bits which you can select using the mouse. 3 Parameterizing03.01 |
Navigation | Previous Page / Next Page |
Following Datasheets | manual_s7_200_2004_cz (534 pages) manual_s7_200_2004_en (534 pages) manual_s7_200_2005_en (534 pages) mapa_cr (1 pages) mapa_praha (1 pages) MCC_programming_en (454 pages) micro_automation_set_testcode_01_en (6 pages) micro_automation_set_testcode_02_en (5 pages) micro_automation_set_testcode_03_en (5 pages) micro_automation_set_testcode_04_en (5 pages) |
Check in e-portals![]() |
World-H-News Products Extensions Partners Automation Jet Parts |
Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |