Manual Automation Systems S7-300, ET 200M Ex I/O Modules A5E00172008-08; Edition 06/2005\nThis manua

We use cookies to personalise content and ads, to provide social media features and to analyse traffic. We share info about use of our site with social media, ads and analytics partners. By continuing to browse you are agreeing to use of cookies. See details or close this message.

Page

/288

100%

Specifications	Manual Automation Systems S7-300, ET 200M Ex I/O Modules A5E00172008-08; Edition 06/2005\nThis manual is part of the documentation package\nwith the order num\ ber: 6ES7398-8RA00-8BA0 A&D AS SM ID
Business section

SIMATIC S7 Ex Digital Modules 2.4 Digital output module SM 322; DO 4 x 15V/20 mA (6ES7322 5RD00-0AB0) S7-300, ET 200M Ex I/O

Specifications	Manual Automation Systems S7-300, ET 200M Ex I/O Modules A5E00172008-08; Edition 06/2005\nThis manual is part of the documentation package\nwith the order num\ ber: 6ES7398-8RA00-8BA0 A&D AS SM ID
Outline	Back to home Retour à la page de garde Torna alla pagina iniziale Volver a Inicio Title Preface Table of contents 1 Mechanical Configuration of an Automation System with SIMATIC S7 Ex Modules 1.1 Use 1.2 Fundamental Guidelines and Specifications 1.3 The LK 393 line chamber 1.4 Configuration of an S7-300 with Ex I/O Modules 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.7.1 General information 1.7.2 Marking of Cables and Lines of Intrinsically Safe Circuits 1.7.3 Wiring and Cabling in Cable Bedding Made of Metal or in Conduits 1.7.4 Summary of Requirements of DIN EN 60079-14 1.7.5 Selecting the cables and wires in accordance with EN 60079-14 1.7.6 Types of cables 1.7.7 Requirements of Terminals for Intrinsically Safe Type of Protection 1.9 Lightning Protection 1.9.1 Measures 1.9.2 External Lightning Protection/Shielding of Buildings 1.9.3 Creating distributed systems with S7-300 and ET 200M 1.9.4 Shielding of Cables and Buildings 1.9.5 Equipotential Bonding for Lightning Protection 1.9.6 Overvoltage Protection 1.9.7 Example of Lightning and Overvoltage Protection 1.9.8 Lightning Strike 1.10 Installation Work in Hazardous Areas 1.10.1 Safety Measures 1.10.2 Use of Ex Assemblies in Hazardous Zone 2 1.10.3 Use of Ex Assemblies in Hazardous Zone 1 1.5 Configuration of an ET 200M with Ex I/O modules 1.6 Equipotential Bonding in Systems with Explosion Protection 1.7 Wiring and Cabling in Ex Systems 1.8 Shielding and Measures to Counteract Interference Voltage 1.9 Lightning Protection 1.10 Installation Work in Hazardous Areas 1.11 Maintenance of Electrical Apparatus B Standards and licenses Glossary Index Product Information A5E00201782-03 Product Information A5E00291373-02 Product Information A5E00336417-01
Suggested Link Details/Purchase
Content	SIMATIC S7 Ex Digital Modules 2.4 Digital output module SM 322; DO 4 x 15V/20 mA (6ES7322 5RD00-0AB0) S7-300, ET 200M Ex I/O Modules 2-26 Manual, Edition 06/2005, A5E00172008-08 2.4 2.4 Digital output module SM 322; DO 4 x 15V/20 mA (6ES7322 5RD00-0AB0) 2.4.1 Features and technical specifications Order Number 6ES7322-5RD00-0AB0 Features Refer to the description of the digital output module SM 322; DO 4 x 24V/10 mA for the module characteristics.
Navigation	Previous Page / Next Page
Following Datasheets	S7300_Fail-Safe_Modules_e (236 pages) S7gs_b (112 pages) S7mEC_EC31RTX (86 pages) S7pr_b (702 pages) SA5005_en_1011_371-0502 (2 pages) Sachbearbeiter_Buchhaltung12 (1 pages) sachsenmilch (2 pages) sachsenmilch_e (3 pages) Sachs_Kompetenz_seit_1895 (3 pages) saegen_von_katalysatoren (2 pages)
Check in e-portals	World-H-News Products Extensions Partners Automation Jet Parts
Sitemap Folder	group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder

Manual Automation Systems S7-300, ET 200M Ex I/O Modules A5E00172008-08; Edition 06/2005\nThis manual is part of the documentation package\nwith the order num\ ber: 6ES7398-8RA00-8BA0 A&D AS SM ID

Manual Automation Systems S7-300, ET 200M Ex I/O Modules A5E00172008-08; Edition 06/2005\nThis manual is part of the documentation package\nwith the order num\ ber: 6ES7398-8RA00-8BA0 A&D AS SM ID