Specifications | PowerFlex 700 AC Drives User Manual PowerFlex 700 AC Drives, PowerFlex 700 Rockwell Automation |
Business section |

Specifications | PowerFlex 700 AC Drives User Manual PowerFlex 700 AC Drives, PowerFlex 700 Rockwell Automation |
Business section |
Specifications | PowerFlex 700 AC Drives User Manual PowerFlex 700 AC Drives, PowerFlex 700 Rockwell Automation |
Outline | PowerFlex 700 AC Drives User Manual Summary of Changes Table of Contents Preface Overview Who Should Use this Manual? What Is Not in this Manual ATEX Approved Drives & Motors Reference Materials Manual Conventions Drive Frame Sizes General Precautions Catalog Number Explanation Appendix C Application Notes Adjustable Voltage Operation External Brake Resistor Lifting/Torque Proving Limit Switches for Digital Inputs Minimum Speed Motor Control Technology Motor Overload Motor Overload Memory Retention Per 2005 NEC Overspeed Position Indexer/Speed Profiler Power Loss Ride Through Process PID Reverse Speed Limit Skip Frequency Sleep Wake Mode Start At PowerUp Stop Mode Stop Dwell Time Voltage Tolerance |
Suggested Link Details/Purchase | |
Content | Publication 20B-UM002E-EN-P Installation/Wiring1-3 Minimum Mounting Clearances Frames 0…6 Specified vertical clearance requirements are intended to be from drive to drive. Other objects can occupy this space; however, reduced airflow may cause protection circuits to fault the drive. In addition, inlet air temperature must not exceed the product specification. Frames 7…10 The drive must be mounted with sufficient space at the top, sides, and front of the cabinet to allow for proper heat dissipation. PowerFlex 700 drives are suitable for use on a circuit capable of delivering up to a maximum of 200,000 rms symmetrical amperes. If a system ground fault monitor (RCD) is to be used, only Type B (adjustable) devices should be used to avoid nuisance tripping. FrameRecommendations 7Allow a minimum of 152 mm (6.0 in.) at the top and bottom of the enclosure and 102 mm (4.0 in.) on the sides. Flange Mount - Allow a minimum of 152 mm (6.0 in.) at the back of the enclosure (from flange mount surface to wall). 8…10Allow a minimum of 152 mm (6.0 in.) at the top of the enclosure. Additionally, allow a minimum of 102 mm (4.0 in.) on each side OR 152 mm (6.0 in.) in the back. 101.6 mm (4.0 in.) 101.6 mm (4.0 in.) 101.6 mm (4.0 in.) 101.6 mm (4.0 in.) PWR STS PORT MOD NET A NET B PWR STS PORT MOD NET A NET B No Adhesive Label (see table above) With Adhesive Label (see table above) 101.6 mm (4.0 in.) 101.6 mm (4.0 in.) 50.8 mm (2.0 in.) 101.6 mm (4.0 in.) 101.6 mm (4.0 in.) PWR STS PORT MOD NET A NET B PWR STS PORT MOD NET A NET B AC Supply Source Considerations ! ATTENTION: To guard against personal injury and/or equipment damage caused by improper fusing or circuit breaker selection, use only the recommended line fuses/circuit breakers specified in Appendix A. |
Navigation | Previous Page / Next Page |
Following Datasheets | 20b-um003_-en-e (1 pages) 20c-in001_-en-p (42 pages) 20c-pm001_-en-p (118 pages) 20c-pm002_-en-p (116 pages) 20c-pp001_-en-p (2 pages) 20c-rn001_-en-p (2 pages) 20c-rn002_-en-p (4 pages) 20c-rn003_-en-p (4 pages) GT7111_DS_Adv (10 pages) GT7131_DS_Adv (17 pages) |
Check in e-portals![]() |
World-H-News Products Extensions Partners Automation Jet Parts |
Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |