Specifications | |
Business section |
|
Specifications | |
Suggested Link Details/Purchase |
|
Content | All leaflets are available on: www.asconumatics.de 63 FEATURES • Solenoid valve suitable for cutting off the flow of a fluid by pinch • For sterile, aseptic, physiological and food applications • No turbulence or gap when cutting off flow by pinch • Silent operation • Full bore output flow compared with a traditional solenoid valve • Manual pulse control for fitting tube • A single component in contact with the fluid, i.e. the tube • Bi-directional flow • The solenoid valves satisfy all relevant EC directives GENERAL Differential pressure See «SPECIFICATIONS» [1 bar =100 kPa] fluids ( ) air, inert gases, water, oil and liquids MATERIALS IN CONTACT WITH FLUID ( ) Ensure that the compatibility of the fluids in contact with the materials is verified Recommended flexible tube VMQ (silicone) (max. hardness: 50 Shore A) The silicone tube is not incleded in our supply OTHER MATERIALS Body Aluminium, anodised Pinch mechanism POM (Graphite-reinforced polyacetal) Internal parts Stainless steel Guide tube Nickel-plated brass ELECTRICAL CHARACTERISTICS Coil insulation class F Connector Spade plug (cable Ø 4-6 mm or Ø 6-10 mm) Connector specification 4 W (DMX) DIN 43650, 9,4 mm, industry standard B 6 W /13 W (AMX/FNX) ISO 4400 / EN 175301-803, form A Electrical safety IEC 335 Electrical enclosure protection Moulded IP65 (EN 60529) Standard voltages DC (=) : 12V - 24V (Other voltages on request) prefix option power ratingsoperatorambienttemperaturerange (TS) replacement coil type (1)inrush ~ holding ~ hot/cold === (VA)(VA)(W)(W)(C°)12 V DC24 V DC SC -4 -10 to + 60 430051854300518601 (DMX) -9430051434300514402 (AMX) -13430053164300531702 (FNX) (1) Refer to the dimensional drawings on the following page. SPECIFICATIONS tube I.D.tube O.D.pinch force operating pressure differential (bar)power coil (W) catalogue number min. max. (PS) air inert gas ( )liquids ( ) (mm)(mm)(daN)==~== NC - Normally closed 0,761,650,1800,80,8-4SCH284A001 1,022,160,2200,80,8-4SCH284A002 1,573,180,2800,80,8-4SCH284A003 1,983,180,2500,80,8-4SCH284A004 2,74,90,6500,80,8-9SCH284A005 4,87,91,100,80,8-13SCH284B006 6,49,51,400,80,8-13SCH284B007 MICRO SOLENOID VALVE pinch mechanism for flexible tube O.D. 1.65 to 9.5 mm NC 2/2 Series284 01007GB-2011/R01 Availability, design and specifications are subject to change without notice. All rights reserved. |
Navigation | Previous Page / Next Page |
Following Datasheets | AMT_en_69-1 (2 pages) AMT_en_81-1 (6 pages) AMT_en_93-1 (2 pages) Analyse-Medical-FR-1 (12 pages) anfahrt_berlin_engl (1 pages) Anhang_2 (62 pages) Anhang_1_des_Abschlussberichtes_FP_276 (19 pages) Anhang_2_des_Abschlussberichtes_FP_276 (6 pages) Anhang_3_In-Vivo-Validierung (10 pages) anilin_en_2 (9 pages) |
Check in e-portals | World-H-News Products Extensions Partners Automation Jet Parts |
Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |