
Specifications | |
Business section |
Specifications | |
Suggested Link Details/Purchase | |
Content | All leaflets are available on: www.asconumatics.de 41 FEATURES • Valves for invitro diagnostics in biochemistry, hematology and immunology • Can be used to control acids and bases, as well as analytical reagents • The valves have easy-to-flush internal cavities and are ideal for controlling aggres sive fluids or when high purity is demanded • Very low dead volume • Hermetic separation of control mechanism and fluid • Reduced heat exchange between coil and fluid • The use of first class materials and thorough valve testing ensure high reliability and a lifetime of at least 1 million cycles • Suitable for vacuum applications GENERAL Differential pressure See «SPECIFICATIONS» [1 bar =100 kPa] 0,7 bar abs. (vacuum on polyamide body only) Maximum viscosity 37 cSt (mm2/s) Response time 20 ms Internal volume < 67 µl fluids ( )temperature range (TS)seal materials ( ) liquids or gases-10°C to +100°C (3)FFPM (perfluoroelastomer) EPDM (ethylene-propylene) CONSTRUCTION PEEK body PA body Body PEEK PA (polyamide 12) MATERIALS IN CONTACT WITH FLUID ( ) Ensure that the compatibility of the fluids in contact with the materials is verified Mounting pad PEEK PA Diaphragm and discs FFPM EPDM Mounting pad seal FFPM EPDM ELECTRICAL CHARACTERISTICS Coil insulation class F Coil Detachable and rotatable Two spade terminals 2.8 x 0.5 mm (DIN 46340) (or detachable size 15 connector) Electrical enclosure protection IP40 (EN60529) Standard voltages DC (=) : 12V - 24V (Other voltages on request) prefix option power ratingsoperatorambienttemperaturerange (TS) replacement coiltype (1) (DNX-4) inrush ~ holding ~ hot/cold === (VA)(VA)(W)(W)(C°)12 V DC24 V DC SC- / 4-10 to + 60430052684300526901 (1) Refer to the dimensional drawings on the following page. SPECIFICATIONS pipe size orifice size flow coefficient Kv operating pressure differential (bar)power coil (W) catalogue number options FPM EPDM min. max. (PS) gases ( )liquids ( ) (mm)(m3/h)(l/min)==~== U - Universal, PEEK body, FFPM seals pad mount1,50,030,502,42,4-4SCS385A001VE- U - Universal, PA body, EPDM seals pad mount1,50,030,5022-4SCS385A002E- MINIATURE SOLENOID VALVES rocker mechanism, fluid isolation pad mounting bodyU P(2) A(1) R(3) 3/2 Series385 213 01003GB-2006/R01 Availability, design and specifications are subject to change without notice. All rights reserved. |
Navigation | Previous Page / Next Page |
Following Datasheets | AMT_en_43-1 (4 pages) AMT_en_47-1 (2 pages) AMT_en_51-1 (2 pages) AMT_en_55-1 (2 pages) AMT_en_59-1 (2 pages) AMT_en_61-1 (2 pages) AMT_en_63-1 (6 pages) AMT_en_69-1 (2 pages) AMT_en_81-1 (6 pages) AMT_en_93-1 (2 pages) |
Check in e-portals![]() |
World-H-News Products Extensions Partners Automation Jet Parts |
Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |