
Specifications | |
Business section |
Specifications | |
Suggested Link Details/Purchase | |
Content | ambient temperature range (TS) power ratings = inrush / holding MATERIALS IN CONTACT WITH FLUID ( ) Ensure that the compatibility of the fluids in contact with the materials is verified Body PEEK Diaphragm FFPM (EPDM, FPM) Seals FFPM (EPDM, FPM)OTHER MATERIALS Internal parts Stainless steel ELECTRICAL CHARACTERISTICS Coil insulation class F Coil connection Pin header with 2 contacts Electrical safety EN 60335 Standard voltages DC (=): 12V (+10% / -5%) (Other voltages on request) 24V (+10% / -5%) FEATURES • Solenoid valve for use with neutral or aggressive liquids and gases in analytical and medical systems • Hermetic separation of control mechanism and fluid: - Prevents particulate contamination caused by friction of moving parts, assuring maximum purity of fluid - Ensures reliable operation in applications with highly aggressive fluids • Special rocker mechanism combined with a separating diaphragm prevents heat transfer to the fluid and eliminates the sticking effect of the valve seat • Good self-draining capability and easy-to-flush internal cavity • Low dead volume • Reduced heat exchange due to integrated power-save switch • Various electrical connection options GENERAL Differential pressure -0,9 to +3 bar (usable in 0,1 bar abs. vacuum) Maximum viscosity 20 cSt (mm2/s), filtered at 50 µm Response time < 10 ms Internal volume < 13 µl (connections not included) fluids ( )temperature range (TS)seal materials ( ) liquids or gases10 to 40 °CFFPM, FPM 5 to 40 °CEPDM (W)(°C) coil type (1) specific2,5 / 1,0*10 to 50 protection IP40 MICRO SOLENOID VALVES rocker mechanism, fluid isolation pad mounting body MICRO 10 Function 2/2 NCFunction 2/2 NO FUNCTIONAL PRINCIPLE 2/23/2 Series 067 * With power-save electronics(1) The coil used for orifice size 1,35 mm is longer by 12,5 mm than that used for the other orifice sizes, see drawings on page 31 electrical connection Connector with two 0,5 mm² lead wires + built-in LED and electrical protection or cable ends, 0,5 m long Function 3/2 U 2 3 1 3 1 2 3 2/2 NC 2/2 NO 3/2 U 2 3 1 1 2 1 2 3 3 1 2 13 2 00191GB-2008/R01 Availability, design and specifications are subject to change without notice. All rights reserved. All leaflets are available on: www.asconumatics.de 29 |
Navigation | Previous Page / Next Page |
Following Datasheets | AMT_en_33-1 (4 pages) AMT_en_41-1 (2 pages) AMT_en_43-1 (4 pages) AMT_en_47-1 (2 pages) AMT_en_51-1 (2 pages) AMT_en_55-1 (2 pages) AMT_en_59-1 (2 pages) AMT_en_61-1 (2 pages) AMT_en_63-1 (6 pages) AMT_en_69-1 (2 pages) |
Check in e-portals![]() |
World-H-News Products Extensions Partners Automation Jet Parts |
Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |