| Specifications | Thermopads john |
| Business section |

| Specifications | Thermopads john |
| Business section |

| Specifications | Thermopads john |
| Suggested Link Details/Purchase | |
| Content | THERMO PADS 1-366NTE Electronics, Inc. Voice (973) 748-5089 FAX (973) 748-6224 http://www.nteinc.com NTE s THERMO-PADS do away with the old fashioned mica wafer and conductive grease method of mounting power semiconductors. These thermally conductive insulators offer low heat transfer resistance while still provid‐ ing high electrical isolation between the parts of the assembly. The elastomeric material combines the electrical isolation of rigid insu‐ lators with the ability to conform to rough sur‐ faces and reduce contact resistance in much the same manner as thermal greases. Proper selection and use of these THERMO-PADS results in a securely-mounted power semi‐ conductor and minimum resistance to the heat transfer between it and the heat sink. INSTALLED COST PER THOUSAND UNITS THERMO-PAD TOTAL $80.00 MICA GREASE TOTAL $180.00 PRE-GREASED MICA TOTAL $130.00 MATERIALS LABOR $175 150 125 100 75 50 25 TYPICAL COST PER THOUSAND Note: NTE425 is a self-adhesive, thermal interface pad for use in computer applications. For additional information, refer to page 1-356. Tensile Strength (psi) / (MPa)3000ASTM D 412 TYPICAL PROPERTIES 0.009 INCHTEST PROPERTYTHICKNESSMETHOD ConstructionSilicone/Fiberglass- Breaking Strength Lbs./Inch30ASTM D 1458 Elongation, (%45°n to Warp and Fill)54ASTM D 412 Volume Resistivity (Ohm - Meter)1011ASTM D 257 Dielectric Breakdown Voltage (VAC)4500ASTM D 149 Dielectric Constant (1000 HZ)5.5ASTM D 150 Continuous Use Temperature (°C)-60° to +180°- Thermal Conductivity W m-k0.9- Hardness, Shore A85ASTM D 2240 Thickness (Expressed in Inches)0.009 ±0.001- Thermal Performance (TO220 Test @ 50psi °C/W)6.61- ColorGrayVisual Flame RatingV-OU.L. 94 Thermal Impedance (Note 1) (Test @ 50psi °C-in3/W)1.45- Note1.The ASTM D 5470 test fixture was used. The recorded value includes interfacial thermal resistance. These values are provided for reference only. Actual applica‐ tion performance is directly related to the surface roughness, flatness and pressure applied. |
| Navigation | Previous Page / Next Page |
| Following Datasheets | therolink1000 (4 pages) Thevenin_PR (3 pages) The_College_of_Europe-The_College_of_Europe (4 pages) The_diverse_requirements_of_digital_signage (1 pages) the_msp_advantage (2 pages) the_revolution_in_tv_experience (2 pages) THF-1 (2 pages) thickfilmelectrodesforsensors (3 pages) ThickFlm_Appl_Spec_Capabilities (6 pages) Thick_Film_Mil-Qual_PR (3 pages) |
Check in e-portals![]() |
World-H-News Products Extensions Partners Automation Jet Parts |
| Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |