| Specifications | OPF2416.pub |
| Business section |
|
|
|
|
|
||||||||||||||||||||||||||||||||||
|
|
|
|
|
||||||||||||||||||||||||||||||||||
| Specifications | OPF2416.pub |
| Business section |
| Specifications | OPF2416.pub |
| Suggested Link Details/Purchase | |
| Content | Optek Technology, Inc. sensor@optekinc.com Carrollton, Texas 75006 (972) 323-2200 www.optekinc.com May 2003 Issue 1.0 Page 1 850nm Fiber Optic Receiver Module in Dual-in-Line Package Technical Data OPF2416, OPF2416T, OPF2416TC Features x 850 nm wavelength x Link distance up to 2 km x Data rates up to 155 Mbps x Wide operating temperature range x Optimized for use with 62.5/125µm and 50/125µm Multimode Fiber x ST® Receptacle x Wave Solderable Dual-in-Line Package Description The OPF0400 series is a cost effective solution for 850 nm fiber optic link designs. The transmitter and receiver pair are designed for use with multimode optical fiber with either 50/125µm or 62.5/125µm diameters. This fiber optic pair is housed in a space saving, auto-insertable package that is compatible with most wave solder processes. Receiver OPF2416 is a low cost solution for high speed, fiber optic communications designs. The internal lensing of this re- ceiver’s design allows optimal response from fiber sizes of 100µm and below. The receiver is comprised of a high speed, low noise, photodi- ode coupled to a transimpedance amplifier (TIA). The photo- diode/TIA combination produces an output voltage that is pro- portional in the input light amplitude. This hybrid approach solves many of the problems of high speed data link designs by placing the photodiode close to the TIA. The amplification of the TIA makes the output much less susceptible to EMI. The output of the OPF2416 is an analog, low impedance, emitter follower voltage source. Subsequent circuitry can utilized to convert the analog voltage to ECL/TTL for digital data rates up to 155 Mbps. The OPF2416 is available with either standard or threaded panel mount ST® receptacles. The threaded version is also available in conductive plastic. Refer to the part number guide for more details. ST® is a registered trademark of OFS Fitel USA. Storage Temperature Range -55 to +85 °C Operating Temperature Range -40 to +85 °C Lead Soldering Temperature 260 °C for 10 Seconds Supply Voltage Range -0.5 to 6.0 V Output Current 25mA Output Pin Voltage -0.5 V Absolute Maximum Ratings OPF2416 10 511 0.1µF 6 3,7 2 -5.2V 0.1µF Recommended AC coupled receiver circuit |
| Navigation | Previous Page / Next Page |
| Following Datasheets | OPF2418-1 (2 pages) OPF320A-1 (3 pages) OPF322 (2 pages) OPF340 (3 pages) OPF342A-1 (2 pages) OPF345A-1 (3 pages) OPF347A-1 (2 pages) OPF370A-1 (3 pages) OPF371A (2 pages) OPF372 (2 pages) |
Check in e-portals |
World-H-News Products Extensions Partners Automation Jet Parts |
| Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |
