Specifications | OPF2412. OPF2412T Opf2412.vp:CorelVentura 7.0 OPF2412, OPF2412T kjohnson |
Business section |

Specifications | OPF2412. OPF2412T Opf2412.vp:CorelVentura 7.0 OPF2412, OPF2412T kjohnson |
Business section |
Specifications | OPF2412. OPF2412T Opf2412.vp:CorelVentura 7.0 OPF2412, OPF2412T kjohnson |
Suggested Link Details/Purchase | |
Content | Fea tures •Low cost •CMOS and TTL compatible •No mounting hardware required •SMA and ST* style ports •Wave Solderable •Wide temperature range De scrip tion The OPF2412 is a low cost digital output fiber optic receiver. The lensed optical system keeps the receiver response consistent for all fiber sizes which makes it ideal for use on fibers as small as 50/125µm. The OPF2412 contains a monolithic photo-IC comprised of a photodetector and DC amplifier driving an open collector output Schottky transistor. The output makes the OPF2412 compatible with TTL and CMOS logic. The receiver is designed to operate from a single +5 V supply. A bypass capacitor (0.1 µF ceramic) should be connected from Pin 2 (VCC) to Pin 3 (Common) of the receiver. *ST is a registered trademark of AT&T. Ab so lute Maxi mum Rat ings (TA = 25o C un less oth er wise noted) Stor age Tem pera ture. -55o C to +85o C Op er at ing Tem pera ture. -55o C to +85o C Lead Sol der ing Tem pera ture (for 10 sec.). 260o C Sup ply Volt age. -0.5 V to 7.0 V Out put Cur rent. 25 mA Out put Volt age. -0.5 V to 18.0 V Open Col lec tor Power Dis si pa tion. 40 mW Fan Out (TTL). 5(1) See Me chani cal Di men sions page 8-19 for Me chani cal Draw ings. “T” suf fix = Threaded ST* pack age. Prod uct Bul le tin OPF2412 De cem ber 1997 5MBd Fi ber Op tic Re ceiver Types OPF2412, OPF2412T Op tek Tech nol ogy, Inc. 1215 W. Crosby Road Car roll ton, Texas 75006 (972) 323- 2200 Fax (972) 323- 2396 PINFUNCTION 1**N.C. 2VCC(5V) 3*Common 4**N.C. 5**N.C. 6Data 7*Common 8**N.C. Bot tom View * Pins 3 & 7 are electrically connected to header. ** Pins 1,4,5 & 8 are electrically connected. 8-8 This component is susceptible to damage from electrostatic discharge (ESD). Normal static precautions should be taken in handling and assembly of this component to prevent ESD damage or degradation. |
Navigation | Previous Page / Next Page |
Following Datasheets | OPF2416-1 (4 pages) OPF2418-1 (2 pages) OPF320A-1 (3 pages) OPF322 (2 pages) OPF340 (3 pages) OPF342A-1 (2 pages) OPF345A-1 (3 pages) OPF347A-1 (2 pages) OPF370A-1 (3 pages) OPF371A (2 pages) |
Check in e-portals![]() |
World-H-News Products Extensions Partners Automation Jet Parts |
Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |