| Specifications | OPB920xZ.pub ltimpa |
| Business section |
|
|
|
|
|
||||||||||||||||||||||||||||||||||
|
|
|
|
|
||||||||||||||||||||||||||||||||||
| Specifications | OPB920xZ.pub ltimpa |
| Business section |
| Specifications | OPB920xZ.pub ltimpa |
| Suggested Link Details/Purchase | |
| Content | Photologic® Slotted Optical Switch “Right Angle Package” Series OPB920AZ, OPB920BZ, OPB920CZ and OPB920DZ OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 11/08 Page 1 of 6 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Features: • Non-contact switching • Right Angle Sensor: LED in tower, photosensor in base • Choice of output configuration • Optical line can be broken in three axis • 24” minimum, 26 AWG UL approved wire leads Description: The OPB920 series optical switch consists of an infrared emitting diode (LED) and a photologic sensor . The LED is mounted on the tower with the photologic sensor mounted on the base of a right angle shape package . The L- Shape or right angle package configuration allows for an opaque object to block the light beam from a multitude of directions including the X-axis Y-axis and Z-axis. The optical center line between the emitter and photosensor is at 45° from the mounting base of the device. The OPB920 Series provides optimum flexibility for the design engineer. The engineer can specify the type of TTL output. For example the output can be: TTL totem pole, TTL open collector, either of which can be buffered or inverted output. All versions have the added stability of hysteresis built into the circuitry. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Product Photo Here RoHS All versions with 26 AWG wire termination (24” [61cm] long) Part Number Guide — OPB920xZ Series OPB920 _ Z A = Totem Pole B = Open Collector C = Inverted Totem Pole D = Inverted Open Collector Applications: • Non-contact interruptive object sensing • Tray-out sensor • Amusement gaming equipment • Low paper tray sensor • Paper sorting equipment • Corner sensor • Printers • Copying machines • Door sensor • Optical Switch |
| Navigation | Previous Page / Next Page |
| Following Datasheets | OPB930-940-L_W (7 pages) OPB950 (2 pages) OPB960-990_SERIES (6 pages) OPBA100 (3 pages) opb_arbiter (36 pages) opb_atmc (24 pages) opb_bram_if_cntlr (9 pages) opb_central_dma (12 pages) opb_ddr (50 pages) opb_deltasigma_adc (13 pages) |
Check in e-portals |
World-H-News Products Extensions Partners Automation Jet Parts |
| Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |
