OPB885_A.pub bprocsal

We use cookies to personalise content and ads, to provide social media features and to analyse traffic. We share info about use of our site with social media, ads and analytics partners. By continuing to browse you are agreeing to use of cookies. See details or close this message.

Page

100%

Specifications	OPB885_A.pub bprocsal
Business section

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972)

Specifications	OPB885_A.pub bprocsal
Suggested Link Details/Purchase
Content	OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A.2 12/06 Page 1 of 3 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Slotted Switch OPB885Z DIMENSIONS ARE IN: INCHES [ MILLIMETERS] Features: • 24” (610 mm) long 26 gauge wired assembly • Non-contact infrared switch • Opaque plastic housing • 0.375” (9.5 mm) slot width • 0.595” (15.1 mm) slot depth Description: OPB885 uses an Infrared LED and a phototransistor in a slotted switch configuration. The assembly has 24” (610mm) 26 AWG wires on each terminal and uses an opaque housing to reduce the sensor’s ambient light sensitivity. Each discrete has an 0.050” (1.27 mm) aperture that focuses the switching sensitivity and limits ambient light absorption by the phototransistor. The housing is made from an opaque plastic with IR transmissive plastic in the front of each aperture to provide dust protection. In the normal unobstructed slot, infrared light from the LED, radiates the phototransistor and becomes forward biased and is considered to be in the “on” state, providing an IC(ON) current that is proportional to the light striking the phototransistor. As the light is blocked by using an opaque object that blocks the infrared light from the LED to the phototransistor, the phototransistor turns “off,” minimizing the IC(ON) current and thus allowing the electrical state to be considered switched. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Applications: • Non-contact interruptive object sensor • Assembly line automation • Machine automation • Equipment security • Machine safety • End of travel sensor • Door sensor Pin # Description White-1 Collector Green-2 Emitter Red-3 Anode Black-4 Cathode Ordering Information OPB885 Non-contact infrared switch Part Number Description 3 2 4 1 RoHS
Navigation	Previous Page / Next Page
Following Datasheets	OPB900-913 (4 pages) OPB916 (4 pages) OPB917 (4 pages) OPB920AZ (6 pages) OPB930-940-L_W (7 pages) OPB950 (2 pages) OPB960-990_SERIES (6 pages) OPBA100 (3 pages) opb_arbiter (36 pages) opb_atmc (24 pages)
Check in e-portals	World-H-News Products Extensions Partners Automation Jet Parts
Sitemap Folder	group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder