Specifications | OPB355-360to390-860to890_2.pub ltimpa |
Business section |
|
Specifications | OPB355-360to390-860to890_2.pub ltimpa |
Business section |
|
Specifications | OPB355-360to390-860to890_2.pub ltimpa |
Suggested Link Details/Purchase |
|
Content | OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue B 02/2011 Page 1 of 10 Slotted Optical Switch OPB355, OPB360, OPB370, OPB380, OPB390 OPB859, OPB860, OPB870, OPB880, OPB890 Series OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. RoHS Features: • 0.125” (3.175 mm) slot width • Choice of aperture (0.050” or 0.010” width) • Choice of opaque or IR transmissive shell material • Choice of mounting configurations • Choice of lead spacing or wires Description: Each device in this series provides the flexibility of a custom device from a standard product line. Building from a standard housing with a 0.125” (3.18 mm) wide slot, a user can choose aperture width, opaque or IR transmissive housing shell material, PCBoard lead spacing or wires and mounting tab configuration. Housings are made from an opaque grade of injection-molded plastic to minimize sensitivity to both visible and near-infrared light. Discrete shells exposed on the parallel faces inside each device’s throat are made from either IR transmissive plastic (for applications where dust protection is needed) or from opaque plastic with aperture openings (for applications that require maximum protection against ambient light). Phototransistor sensor devices include the OPB859, OPB360, OPB370, OPB380, OPB390, OPB860 and OPB870, while the OPB355 provides a photodiode sensor. The photodiode sensor has a lower and more linear output-versus-light input than the phototransistor models. The OPB355, OPB360, OPB370, OPB859, OPB860 and OPB870 are designed for direct connection to through hole PCBoards. The OPB380, OPB390, OPB880 and OPB890 have 26 AWG, UL approved wires connected directly to the device for remote sensing applications. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Product Photo Here Applications: • Non-contact object sensing • Assembly line automation • Machine automation • Equipment safety • Machine safety OPB360, OPB370, OPB380, OPB390 OPB859 OPB860, OPB870, OPB880, OPB890 2 4 1 3 CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK’s molded plastics. Applies to: OPB360, OPB370, OPB380, OPB390 and OPB860, OPB870, OPB880, OPB890. OPB355 2 4 1 3 “N” “L” “P” “T” Color # Description 1 Red 2 Black 3 White 4 Green Wire Colors |
Navigation | Previous Page / Next Page |
Following Datasheets | OPB885 (3 pages) OPB900-913 (4 pages) OPB916 (4 pages) OPB917 (4 pages) OPB920AZ (6 pages) OPB930-940-L_W (7 pages) OPB950 (2 pages) OPB960-990_SERIES (6 pages) OPBA100 (3 pages) opb_arbiter (36 pages) |
Check in e-portals | World-H-News Products Extensions Partners Automation Jet Parts |
Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |