Specifications | OPB708-709-740-748.pub rparks |
Business section |
|
Specifications | OPB708-709-740-748.pub rparks |
Business section |
|
Specifications | OPB708-709-740-748.pub rparks |
Suggested Link Details/Purchase |
|
Content | OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue C 10/11 Page 1 of 6 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Reflective Object Sensor OPB708, OPB709 OPB740 Series, OPB740WZ Series Description: Each reflective object sensor in the OPB708, OPB709, OPB740 through OPB746 and OPB740WZ through OPB746WZ series consists of an infrared emitting diode and a NPN silicon phototransistor or a photodarlington. The OPB747WZ and OPB748WZ consist of a Red visible LED and a low light level rejection (RBE) NPN silicon phototransistor. The Red LED allows better contrast ratio when detecting Black marks on a White surface. All these devices are mounted side-by-side on converging optical axes in a black plastic housing focusing on a small area and depth of field. OPB7 _ _ WZ series are wired (UL approved wire) devices that offer various lens options, including no windows, blue polysulfone windows for dust protection or opaque aperture windows with offset openings for improved target resolution. On each sensor included in this data sheet, the photosensor responds to radiation only when a reflective object passes within its field of view. Custom IC(ON) current binning, special wire lengths and connectorization is available through your OPTEK rep. Features: • Focused for maximum sensitivity • Phototransistor or photodarlington output • Crosstalk does not exceed specified ICEO • 24” (610 mm) wire length • 26 AWG wire size Product Photo Here Applications: • Non-contact reflective object sensor • Assembly line automation • Machine automation • Machine safety • End of travel sensor • Door sensor • Thermal Paper Mark OPB7_ _WZ Series OPB708, OPB709, OPB740, OPB745 Series Part Number LED Peak Wavelength Sensor Reflection Distance Inch (mm) Lead Length/ Wire Type OPB708 935 nm Transistor Min=0.08” [2.04mm] Typ=0.15 [3.81mm] Max=0.30” [7.62mm] 0.150 Minimum OPB709 Darlington OPB740 890 nm Transistor OPB741 OPB742 OPB743 OPB744 OPB745 Darlington OPB740WZ Transistor 24 / 26 AWG Wire OPB741WZ OPB742WZ OPB743WZ OPB744WZ OPB745WZ Darlington OPB746WZ 935 nm OPB747WZ 645nm OPB748WZ Transistor RBE Transistor CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK’s molded plastics. Applies to: OPB460, OPB470, OPB480, OPB490. RoHS |
Navigation | Previous Page / Next Page |
Following Datasheets | OPB710-730 (4 pages) OPB711-712 (4 pages) OPB715-716-717-718 (4 pages) OPB720A-06Z (5 pages) OPB725A-18Z (3 pages) OPB732 (3 pages) OPB733TR (6 pages) OPB750-755 (4 pages) OPB760THRU770SERIES (6 pages) OPB800_810SERIES (5 pages) |
Check in e-portals | World-H-News Products Extensions Partners Automation Jet Parts |
Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |