
Specifications | |
Business section |
Specifications | |
Suggested Link Details/Purchase | |
Content | www.stancor.com54 RELAYS AND CONTACTORS D.C. Power Contactors – Type 124 Coil Contact Rating-(Amps.) DIMENSIONS STANCOR Coil Resistance Inductive Load INCHES PART Duty Terminal Pole Bracket Volt. (Ohms) Contact Volt. Normally Open Normally Closed Case Weight Agency Sec. NUMBER Cycle Type* Form Style D.C. @ 25˚C Material D.C. Continuous Inrush** Continuous Inrush** L W H (oz.) Certif. A 124-906 Continuous 3 SPNO Standard 12 13.2 Silver Alloy 12 100 400 - - 3.56 3.13 2.19 16.0 - 124-902 Continuous 4 SPNO Standard 12 13.2 Silver Alloy 12 100 400 - - 3.56 3.13 2.19 16.0 - 124-910 Continuous 6 SPDT Standard 12 13.2 Silver Alloy 12 200 600 50 200 4.69 3.13 2.19 19.0 - B 124-907 Continuous 3 SPNO Standard 24 53.0 Silver Alloy 24 100 400 - - 3.56 3.13 2.19 16.0 - 124-903 Continuous 4 SPNO Standard 24 53.0 Silver Alloy 24 100 400 - - 3.56 3.13 2.19 16.0 - 124-911 Continuous 6 SPDT Standard 24 53.0 Silver Alloy 24 200 600 50 100 4.69 3.13 2.19 19.0 - C 124-908 Continuous 3 SPNO Standard 36 120.0 Silver Alloy 36 100 400 - - 3.56 3.13 2.19 16.0 - 124-904 Continuous 4 SPNO Standard 36 120.0 Silver Alloy 36 100 400 - - 3.56 3.13 2.19 16.0 - 124-912 Continuous 6 SPDT Standard 36 120.0 Silver Alloy 36 200 600 50 100 4.69 3.13 2.19 19.0 - D 124-913 Continuous 4 SPNO Standard 48 213.0 Silver Alloy 36 200 600 - - 3.56 3.13 2.19 16.0 - Engineering Design Data Operation in % of Nom. Breakdown Voltages Coil Rating Coil VoltageRating All Terminals - 60 Hz RMS Contact Material Electrical Life Mechanical Life Nominal Open Max. Magnetic Max. Contacts Oper. Oper. Oper. D.C. Coil Rating Safe Opposite Same To Oper. At Per Oper. At Per Temp. Type (Watts) Pick-up Operate Polarity Polarity Ground Power Pilot Rated Load Min. No Load Min °F 124 12 75% 110% 500 500 500 Silver Alloy Gold 50,000 2 100,000 6 150 For outline drawings refer to page 55. Temperature Range –– -40˚F to 150˚F Terminations –– Contacts: 5/16 -24 UNF-2A thread –– Coil: #10-32 UNF-2A thread Recommended Mounting –– Vertical plane with coil terminals up. * Terminal Type: “3” = Grounded Coil, SPNO “4” = Isolated Coil, SPNO “6” = Isolated Coil, SPDT ** Inrush Current: Current applied within the first 1/2 second of contact closure Hardware Torque Specification –– Contact Terminal: 60 inch-lbs., max. –– Coil Terminal: 12-18 inch lbs. –– Caution: A back-up wrench must be used to hold the bottom nut stationary Type 124 Custom Design Capabilities –– Coil voltages 6 VDC through 48 VDC –– High vibration –– Gold plated contacts for pilot duty (low load switching) applications –– Please complete application data form on page 95 of this section. Note: Caution must be used in coil selection for use in 12 volt systems where battery charging may expose coil to continuous, higher-than-rated voltage. Stancor will not be responsible for consequences of misapplied solenoids. |
Navigation | Previous Page / Next Page |
Suggested Link Details/Purchase | |
Following Datasheets | Pg_066-1 (1 pages) PH5_P (1 pages) PHAP40-B_1 (2 pages) photoelectric_2 (27 pages) PHxx-3_5-P (1 pages) picoled_mini_npb-e_4 (2 pages) PIS2408 (1 pages) PIS2812 (1 pages) PIS4716 (1 pages) pism (1 pages) |
Check in e-portals![]() |
World-H-News Products Extensions Partners Automation Jet Parts |
Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |