We use cookies to personalise content and ads, to provide social media features and to analyse traffic. We share info about use of our site with social media, ads and analytics partners. By continuing to browse you are agreeing to use of cookies. See details or close this message.

Page

/828

100%

Specifications
Business section

6 6.1Speed setpoint mode (P0700 = 1) 6-318 Siemens AG 2003 All rights reservedSIMODRIVE POSMO SI/CD/CA User Manual (POS3)

Specifications
Suggested Link Details/Purchase
Content	6 6.1Speed setpoint mode (P0700 = 1) 6-318 Siemens AG 2003 All rights reservedSIMODRIVE POSMO SI/CD/CA User Manual (POS3) – 07.03 Edition 6.1.6Fixed speed setpoint Speed setpoints can be defined in parameters using this function. The required fixed setpoints for the speed setpoint input is selected via in- put signals. The currently selected fixed setpoint can be displayed via output signals. The following signals are used for the “fixed speed setpoint” function: Input signals (refer to the index entry “Input signal, digital – .”) –Fixed speed setpoint 1st input (function number = 15) –Fixed speed setpoint 2nd input (function number = 16) –Fixed speed setpoint 3rd input (function number = 17) –Fixed speed setpoint 4th input (function number = 18) Output signals (refer to the index entry “Output signal, digital – .”) –Status, fixed speed setpoint 1st output (function number = 15) –Status, fixed speed setpoint 2nd output (function number = 16) –Status, fixed speed setpoint 3rd output (function number = 17) –Status, fixed speed setpoint 4th output (function number = 18) The following parameters are used for the “Fixed speed setpoint” func- tion: P0641:16Fixed speed setpoint (SRM, ARM) Fixed velocity setpoint (SLM) The following sequence is practical when commissioning this function: 1.Enter the required fixed speed setpoints (refer to Chapter A.1) P0641:0 = No significance P0641:1 = Required fixed setpoint 1 P0641:2 = Required fixed setpoint 2, etc. 2.Parameterize the input terminals (refer to Chapter 6.4.1 and 6.4.2) 3.Parameterize the output terminals (refer to Chapter 6.4.3 and 6.4.4) 4.Check the function Description Input/ output signals Parameter overview (refer to Chapter A.1) Commissioning the function 03.016 Description of the Functions
Navigation	Previous Page / Next Page
Following Datasheets	manual_s7_200_2004_cz (534 pages) manual_s7_200_2004_en (534 pages) manual_s7_200_2005_en (534 pages) mapa_cr (1 pages) mapa_praha (1 pages) MCC_programming_en (454 pages) micro_automation_set_testcode_01_en (6 pages) micro_automation_set_testcode_02_en (5 pages) micro_automation_set_testcode_03_en (5 pages) micro_automation_set_testcode_04_en (5 pages)
Check in e-portals	World-H-News Products Extensions Partners Automation Jet Parts
Sitemap Folder	group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder