Specifications | Andre Marek |
Business section |
Specifications | Andre Marek |
Suggested Link Details/Purchase | |
Content | instabus EIB Application program description Version V2.3 in November 2004 20 CO LOGO! 900E02 Use of the application program Product family: Controller Product type: LOGO Manufacturer: Siemens Name: CM EIB/KNX Order no.: 6BK1700-0BA00-0AA1 Functional description The application program “20 CO LOGO! 900E02” controls the communication between the LOGO! and the EIB/KNX bus via the communication module CM EIB/KNX. By configuring the application program in ETS (EIB Tool Software), the division of the input and output area of the LOGO! can be defined as a “hardware channel” and as a “virtual channel” on the EIB/KNX bus. This characteristic also applies for analog processing. A communication object is assigned to each “virtual channel” of the LOGO! module. The real-time clock of the LOGO! can be used as a master or slave via the EIB/KNX bus. The behaviour of the communication objects of the communication module CM EIB/KNX when the status of the EIB/KNX bus changes, can also be parameterised. A “virtual input channel” can be used as a bus state i.e. a bus voltage failure can be reported. Summary of the functions: • Specification of the hardware configuration (number of local digital inputs and outputs, analog inputs) • Selection of time master or slave • Use of I24 as a bus status signal • Behaviour on bus voltage failure/recovery • Input type as monoflop/normal for digital inputs via the EIB/KNX • Output type as normal/dimmer/edge evaluation for digital outputs via the EIB/KNX • Data type, adaptation, cyclical sending and sending on change in value for analog outputs via the EIB/KNX and analog inputs on the LOGO! EIB inputs/outputs The diagram below shows a possible application. Example: I1.I12 Q1.Q8 AI1,AI2 Time Master Q9…Q16 AO1, AO2 I13…I24 AI3…AI8 Time Slave LOGO! 24V Siemens AG 8 pages Technical manual Automation and Drives Group System Engineering Division © Siemens AG 2004 Update: http://www.siemens.de/installationstechnik P.O. Box 23 55, D-90713 Fürth Subject to change without further notice http://www.ad.siemens.de/logo/index_00.htm 8/1 AI1,AI2 |
Navigation | Previous Page / Next Page |
Following Datasheets | appex_micro_10a_v1_0_en (89 pages) appex_micro_10_v1_0_en (81 pages) appex_micro_1_v1_0_en (91 pages) appex_micro_5_v1_0_en (79 pages) BA_BEDIENGERAET_XP170X_en (252 pages) bop_aop_single_drive_mount_kit_en (2 pages) brochure_micro_10_2005_cz (24 pages) brochure_simatic_et200_11_2005_en (40 pages) C7_prospekt_04_2005_cz (12 pages) clanek_0BA4_cz (3 pages) |
Check in e-portals | World-H-News Products Extensions Partners Automation Jet Parts |
Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |