Installation and Operating Manual Distributed I/O System Fail-Safe Engineering ET 200S Distributed I

We use cookies to personalise content and ads, to provide social media features and to analyse traffic. We share info about use of our site with social media, ads and analytics partners. By continuing to browse you are agreeing to use of cookies. See details or close this message.

Page

/228

100%

Specifications	Installation and Operating Manual Distributed I/O System Fail-Safe Engineering ET 200S Distributed I/O System - Fail-Safe Modules A5E00103686-07; 08/2008 I IA AS SM ID 1
Business section

Fail-Safe Modules 7.2 PM-E F pm DC24V PROFIsafe Power Module ET 200S Distributed I/O System - Fail-Safe Modules 74 Installati

Specifications	Installation and Operating Manual Distributed I/O System Fail-Safe Engineering ET 200S Distributed I/O System - Fail-Safe Modules A5E00103686-07; 08/2008 I IA AS SM ID 1
Outline	Distributed I/O System Fail-Safe Engineering ET 200S Distributed I/O System - Fail-Safe Modules Legal information Preface Table of contents 1 Product Overview 1.1 Introduction 1.2 ET 200S fail-safe modules 1.3 Using ET 200S Fail-Safe Modules 1.4 Guide for Commissioning of ET 200S with Fail-Safe Modules 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 2.1 Configuring ET 200S with Fail-Safe Modules 2.2 Assigning Modules of an ET 200S 2.3 Maximum Number of Connectable Modules/Maximum Configuration 2.4 Configuration and Parameter Assignment 2 Configuring 3 Address Assignment and Installation 4 Wiring and Fitting Modules 5 Diagnostics 6 General Technical Specifications 7 Fail-Safe Modules A Diagnostic Data of Fail-Safe Modules B Dimension drawings C Accessories and Order Numbers D Response times E Connecting Loads Glossary Index
Suggested Link Details/Purchase
Content	Fail-Safe Modules 7.2 PM-E F pm DC24V PROFIsafe Power Module ET 200S Distributed I/O System - Fail-Safe Modules 74 Installation and Operating Manual, 08/2008, A5E00103686-07 7.2.4 Parameters of the PM-E F pm DC24V PROFIsafe Parameters in STEP 7 The table below lists the parameters that can be set for the PM-E F pm DC24V PROFIsafe. Table 7- 3 Parameters of the PM-E F pm DC24V PROFIsafe Parameter Range Default Type of Parameter Effective Range F-Parameters: F_destination_address 1 to 1022 is assigned by STEP 7 Static Module F monitoring time 10 to 10 000 ms 150 ms Static Module Module Parameters: Behavior after channel faults* Passivate the entire module/Passivate the channel Passivate the entire module Static Module DO channel 0 Activated/deactivate d Activated Static Channel Readback time 1 to 400 ms 1 ms Static Channel Diagnostics: Wire break Activated/deactivate d Deactivated Static Channel DO channel 1 Activated/deactivate d Activated Static Channel Readback time 1 to 400 ms 1 ms Static Channel Diagnostics: Wire break Activated/deactivate d Deactivated Static Channel * This setting is relevant only with an installed S7 distributed safety V 5.4 or higher or generally with S7 F systems optional packages. Readback Time Parameter Each output channel has its own selectable readback time. This time specifies the maximum duration of the turn off test for the corresponding channel and therefore also the readback time for turning off the channel. The following readback times can be set: 1 ms, 5 ms, 10 ms, 50 ms, 100 ms, 200 ms and 400 ms. You should set an adequately high readback time if the channel involved switches high capacitive loads. If the readback time for a controlled capacitive load is set too low, the output channel is passivated because the discharge of the capacitance does not take place within the turn off test. If the readback signals are incorrect, the short circuit fault only causes passivation of the output channel after the readback time has elapsed.
Navigation	Previous Page / Next Page
Following Datasheets	Safety_Evolution_Tool (8 pages) Safety_Functional_Examples (512 pages) Safety_F_F-H_Conf_Progr (338 pages) Safety_Integrated_2009_EN (544 pages) Safety_Integrated_Functional_Examples_2007EN (512 pages) Safety_S7_DS_Conf_Progr (318 pages) Safety_S7_DS_GetSta (42 pages) Safety_Short_Catalog_2007 (428 pages) Safety_System_Manual (345 pages) Safety_System_Manual_Suplement_en (92 pages)
Check in e-portals	World-H-News Products Extensions Partners Automation Jet Parts
Sitemap Folder	group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder

Installation and Operating Manual Distributed I/O System Fail-Safe Engineering ET 200S Distributed I/O System - Fail-Safe Modules A5E00103686-07; 08/2008 I IA AS SM ID 1

Installation and Operating Manual Distributed I/O System Fail-Safe Engineering ET 200S Distributed I/O System - Fail-Safe Modules A5E00103686-07; 08/2008 I IA AS SM ID 1