| Specifications | |
| Business section |
|
|
|
|
|
||||||||||||||||||||||||||||||||||
|
|
|
|
|
||||||||||||||||||||||||||||||||||
| Specifications | |
| Business section |
| Specifications | |
| Suggested Link Details/Purchase | |
| Content | Redundancy Availability of resources or equipment more than is actually required for its execution. Requirement Class (AK) Measure of the safety-related perfor- mance of control equipment. Defined in DIN V 19250 and DIN V VDE 0801. Risk Combination of the probability of the occurrence of damage and the extent of the damage. Safety Freedom from unacceptable risk. Safety function Function (e.g. of a machine or a con- trol) whose failure (or breakdown) can increase the risk(s). Safety functions of controls (EN 954 or prEN ISO 13849-1) “A function, initiated by an input signal and processed by safety-related parts of controls that allows the machine to achieve a safe condition (as system).” Safety goal To keep the potential hazards for man and the environment as low as possi- ble without restricting industrial pro- duction, the use of machines or the production of chemicals as far as ab- solutely necessary. Safety Integrity Level (SIL) In IEC 61508, this is defined as the measure for the safety performance of electrical or electronic control equipment. (-> Section 1) Safety-related control function (IEC 62061) Control function that is executed by a safety-related control system in order that a system goes into a safe condi- tion (e.g. machine) or to avoid hazar- dous conditions occurring. Safety-related control function Slightly differing definitions are provi- ded in the various Standards. Stop This is a function that is intended to avoid or minimize hazards to person- nel, damage to the machine or the execution of operational processes. It has priority over every other opera- ting mode. Stop Category A term which is used in EN 60204-1 to designate three different stopping functions. Two-hand circuit Control device, which requires that it is simultaneously actuated by both hands in order to activate hazardous machine functions and also maintain them. 4Safety Integrated System Manual 11 – Appendix |
| Navigation | Previous Page / Next Page |
| Following Datasheets | Safety_System_Manual_Suplement_en (92 pages) Safety_terminologia_i_standardy (52 pages) Safety_Terms_Standards (52 pages) safe_ethernet (2 pages) SAG_D_op061212_1425057 (52 pages) Sail_Drive_2010_09 (4 pages) Sajtkoezlemny_ZFH_GOP-2010-213 (1 pages) sales_release_SINVERT_PVS_600Series (3 pages) Sales_Support_Coordinator12 (1 pages) Salyp_FR (2 pages) |
Check in e-portals |
World-H-News Products Extensions Partners Automation Jet Parts |
| Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |
