Manual Point-to-point connection CP 441 Installation and Parameter Assignment A5E00405449-01, 10/200

We use cookies to personalise content and ads, to provide social media features and to analyse traffic. We share info about use of our site with social media, ads and analytics partners. By continuing to browse you are agreeing to use of cookies. See details or close this message.

Page

/250

100%

Specifications	Manual Point-to-point connection CP 441 Installation and Parameter Assignment A5E00405449-01, 10/2005 A&D AS SM ID
Business section

Diagnostics Functions of the CP 441 8.3 Diagnostics via the Error Signaling Area SYSTAT Point-to-point connection CP 441 Inst

Specifications	Manual Point-to-point connection CP 441 Installation and Parameter Assignment A5E00405449-01, 10/2005 A&D AS SM ID
Outline	Title Preface Table of contents 1 Product Description 1.1 Applications for the Communication Processor 1.2 Transmission Procedure with a Point-to-Point Connection 1.3 Structure of the CP 441 1.4 Properties of the Serial Interface 1.4.1 Properties of the RS 232C Interface Submodule 1.4.2 Attributes of the 20mA TTY interface submodule 1.4.3 Properties of the X27 (RS 422/ 485) Interface Submodule 1.5 Installation Guidelines 4 Mounting the CP 441 4.1 CP 441 slots 4.2 Mounting and Dismounting the CP 441 4.2.1 Installation steps 4.2.2 Removal steps 2 Basic Principles of Serial Data Transmission 2.1 Serial Transmission of a Character 2.2 Transmission Procedure with a Point-to-Point Connection 2.3 Transmission integrity 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.6 Data Transmission with the ASCII Driver 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 7 Start-up Characteristics and Operating Mode Transitions of the CP 441 9 Diagnostics Functions of the CP 441 9 Programming Example for System Function Blocks A Technical Specifications B Cables C SFB Parameters D Accessories and Order Numbers E Literature on SIMATIC S7 Index
Suggested Link Details/Purchase
Content	Diagnostics Functions of the CP 441 8.3 Diagnostics via the Error Signaling Area SYSTAT Point-to-point connection CP 441 Installation and Parameter Assignment Manual, 10/2005, A5E00405449-01 8-13 Event Class 5 (05H): Error while processing CPU request Event no. Event Text To correct or avoid errors (05)0CH Only for printer drivers: Conversion statement not executable Check the conversion statement. Conversion statements that cannot be executed are output in the expression in accordance with the defined width and the valid remainder of the conversion statement or the standard representation with * characters. (05)0DH Only for printer drivers: Width in conversion statement too small or too great Correct the specified width of the variable in the conversion statement on the basis of the variable s maximum number of characters in text-based representation types (A, C, D, S, T, Y, Z). Only as many characters as will fit in the specified width appear in the printout; the text is truncated to this width. In all other cases, * characters are output corresponding to the width. (05)0EH Only for ASCII drivers: An error occured while sending. The defined end-of- text characters did not occur within the maximum allowed length or in the case of automatic appending, the maximum allowed transmission length was exceeded. Extend the end-of-text characters in the transmission buffer at the desired point or select a shorter message frame length for automatic appending. (05)0FH Number of requests that can be processed simultaneously too great Change your STEP 7 program so that fewer requests can run simultaneously. (05)10H Area occupied (resource) Repeat the request. (05)11H Length not permissible for this request type Divide up the data to be transmitted into several requests. (05)12H RK 512 only: Mismatch between SFB s source and destination parameters. Obtain the permissible values from the request tables. (05)13H Data type error (DB .): Unknown or impermissible data type (e.g. DE) RK 512 only: Mismatch between SFB s source and destination data types. Obtain the permissible data types and their combinations from the request tables. (05)14H Specified start addresses too high for desired data type, or start address or DB/DX number too low. Obtain from the request tables the permissible start addresses and DB/DX numbers that can be specified in the program. (05)15H RK 512 only: Wrong bit number specified for coordination flag. Permissible bit numbers: 0 to 7 (05)16H RK 512 only: Specified CPU too high. Permissible CPU numbers: none, 1, 2, 3 or 4 (05)17H An error occured while receiving. The receive message frame is longer than 4 KB or is longer than the defined fixed receive length or the receive message frame does not fit into the destination frame. Reduce the length of your connection partner s message frame or increase the length of your receive DB. (05)18H Transmission length at sending too great ( >4 KB) RK 512 only: Obtain the permissible lengths from the request tables. Split the request up into several shorter requests. (05)19H CP in wrong mode for PLC request Check if the addressed interface is parametered.
Navigation	Previous Page / Next Page
Suggested Link Details/Purchase

Following Datasheets	S7-400_CP443-5_basic_e (22 pages) S7-400_CP443-5_extended_e (27 pages) S7-400_FM451_e (214 pages) S7-400_FM452_e (210 pages) S7-400_FM453_e (432 pages) S7-400_FM455_e (286 pages) S7-400_FM458-1_DP_e (188 pages) S7-400_FM458_Application_e (138 pages) S7-TIA_PORTAL_V11 (20 pages) s70 (3 pages)
Check in e-portals	World-H-News Products Extensions Partners Automation Jet Parts
Sitemap Folder	group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder

Manual Point-to-point connection CP 441 Installation and Parameter Assignment A5E00405449-01, 10/2005 A&D AS SM ID

Manual Point-to-point connection CP 441 Installation and Parameter Assignment A5E00405449-01, 10/2005 A&D AS SM ID