Manual Point-to-point connection CP 441 Installation and Parameter Assignment A5E00405449-01, 10/200

We use cookies to personalise content and ads, to provide social media features and to analyse traffic. We share info about use of our site with social media, ads and analytics partners. By continuing to browse you are agreeing to use of cookies. See details or close this message.

Page

/250

100%

Specifications	Manual Point-to-point connection CP 441 Installation and Parameter Assignment A5E00405449-01, 10/2005 A&D AS SM ID
Business section

Communication via System Function Blocks 6.4 Using the System Function Blocks with the RK 512 Computer Connection Point-to-po

Specifications	Manual Point-to-point connection CP 441 Installation and Parameter Assignment A5E00405449-01, 10/2005 A&D AS SM ID
Outline	Title Preface Table of contents 1 Product Description 1.1 Applications for the Communication Processor 1.2 Transmission Procedure with a Point-to-Point Connection 1.3 Structure of the CP 441 1.4 Properties of the Serial Interface 1.4.1 Properties of the RS 232C Interface Submodule 1.4.2 Attributes of the 20mA TTY interface submodule 1.4.3 Properties of the X27 (RS 422/ 485) Interface Submodule 1.5 Installation Guidelines 4 Mounting the CP 441 4.1 CP 441 slots 4.2 Mounting and Dismounting the CP 441 4.2.1 Installation steps 4.2.2 Removal steps 2 Basic Principles of Serial Data Transmission 2.1 Serial Transmission of a Character 2.2 Transmission Procedure with a Point-to-Point Connection 2.3 Transmission integrity 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.5.1 Sending Data with RK 512 2.5.2 Fetching Data with RK 512 2.4 Data Transmission with the 3964(R) Procedure 2.4.1 Control characters 2.4.2 Block Checksum 2.4.3 Sending Data with 3964(R) 2.4.4 Receiving Data with 3964(R) 2.4.5 Handling Erroneous Data 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 2.8.1 Parameter Assignment Data of the 3964(R) Procedure 2.8.2 Parameter Assignment Data of the RK 512 Computer Connection 2.8.3 Parameter Assignment Data of the ASCII Driver 2.8.4 Parameter Assignment Data of the Printer Driver 2.6 Data Transmission with the ASCII Driver 2.6.1 Sending Data with the ASCII Driver 2.6.2 Receiving Data with the ASCII Driver 2.6.3 RS 485 Mode 2.5 Data Transmission with the RK 512 Computer Connection 2.6 Data Transmission with the ASCII Driver 2.7 Data Transmission with the Printer Driver 2.8 Parameter Assignment Data of the Protocols 7 Start-up Characteristics and Operating Mode Transitions of the CP 441 9 Diagnostics Functions of the CP 441 9 Programming Example for System Function Blocks A Technical Specifications B Cables C SFB Parameters D Accessories and Order Numbers E Literature on SIMATIC S7 Index
Suggested Link Details/Purchase
Content	Communication via System Function Blocks 6.4 Using the System Function Blocks with the RK 512 Computer Connection Point-to-point connection CP 441 Installation and Parameter Assignment 6-30 Manual, 10/2005, A5E00405449-01 At the CP 441 Communication Partner At the communication partner no programming is necessary in the S7 user program of the CPU. Example Table 6-22 Example for calling SFB 15 (PUT): STL CALL SFB 15, DB52 REQ := DB400.DBX0.0 ID :=W#16#1000 DONE := DB400.DBX0.4 ERROR := DB400.DBX0.5 STATUS := DB400.DBW12 ADDR_1 := P#DB30.DBX 0.0 WORD 10 ADDR_2 ADDR_3 ADDR_4 SD_1 := P#DB10.DBX 0.0 WORD 10 SD_2 SD_3 SD_4 When this SFB is called, at a positive edge at bit DBX0.0, data is sent to the communication partner, where it is placed in DB30. If several data areas are sent at the same time, additional SD_i and ADDR_i pairs can be assigned parameters. See the CP441 ANY demo project for instructions on how to change the send and receive parameters of the ANY data type at runtime. The demo project is in the Examples STEP 7 catalog under CP441. Request Table The following table lists the data types which can be transmitted. Table 6-23 Request table for Sending data with RK 512 to the communication partner CP 441, using PUT Parameter Assignment in the PUT SFB, Parameter SD_1 (Source) Parameter Assignment in PUT SFB, Parameter ADDR (Destination) Source, PUT from S7 To Destination, Communication Partner S-TYPE S-DBNO S-Offset (byte) D-TYPE D-DBNO D-Offset (words) Data block Data block DB 1 - * 0 - * DB 1-255 0-255 Flag Data block MB irrelevant 0 - * DB 1-255 0-255 Inputs Data block IB irrelevant 0 - * DB 1-255 0-255 Outputs Data block QB irrelevant 0 - * DB 1-255 0-255 Counters Data block C irrelevant 0 - * DB 1-255 0-255 Times Data block T irrelevant 0 - * DB 1-255 0-255 This value is dictated by the CPU that you use. * Dependent on the CPU of the communication partner, max. 450 bytes Abbreviations used in the table: S-TYPE= source type, S-DBNO= source data block number, S-Offset= source start address, D-TYPE= destination type, D-DBNO= destination data block number, D-Offset= destination start address
Navigation	Previous Page / Next Page
Following Datasheets	S7-400_CP443-5_basic_e (22 pages) S7-400_CP443-5_extended_e (27 pages) S7-400_FM451_e (214 pages) S7-400_FM452_e (210 pages) S7-400_FM453_e (432 pages) S7-400_FM455_e (286 pages) S7-400_FM458-1_DP_e (188 pages) S7-400_FM458_Application_e (138 pages) S7-TIA_PORTAL_V11 (20 pages) s70 (3 pages)
Check in e-portals	World-H-News Products Extensions Partners Automation Jet Parts
Sitemap Folder	group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder

Manual Point-to-point connection CP 441 Installation and Parameter Assignment A5E00405449-01, 10/2005 A&D AS SM ID

Manual Point-to-point connection CP 441 Installation and Parameter Assignment A5E00405449-01, 10/2005 A&D AS SM ID