| Specifications | Processing in Water in Still Retorts \Retort Survey\ FORM FDA 3511b PSC Publishing Services |
| Business section |
|
|
|
|
|
||||||||||||||||||||||||||||||||||
|
|
|
|
|
||||||||||||||||||||||||||||||||||
| Specifications | Processing in Water in Still Retorts \Retort Survey\ FORM FDA 3511b PSC Publishing Services |
| Business section |
| Specifications | Processing in Water in Still Retorts \Retort Survey\ FORM FDA 3511b PSC Publishing Services |
| Suggested Link Details/Purchase | |
| Content | PAGE 1 of 9 Firm Name, City & State: Inspection Date(s): Investigators: FEI Number: FCE Number: FORM FDA 3511b (1/11) RETORT DESCRIPTION INSTRUCTIONS Complete the question blocks below. Narrative responses to each item can be entered in the item’s “comments” area or where otherwise prompted. Draw a diagram of the retort, or obtain one from the firm and attach it to the EIR as an exhibit. Measure and verify retort plumbing – record on this form. Report all pipe sizes as inside diameter (ID). Before entering the interior of the retort, you must confirm with the firm that you are following the firm’s Standard Operating Procedures designed to meet OSHA confined space requirements. If the firm insists that only plant personnel enter the retort, witness the measurement procedure and data collection. To obtain OSHA confined space information and safety procedures, see the confined space presentation on the FDA ORAU web site. If the firm is not aware of the OSHA confined space requirements or does not have a confined space program, DO NOT ENTER THE RETORT. If problems are found with the firm’s retort equipment or processing system, refer the reader to the Turbo EIR for a narrative description of specific problems with supporting evidence, under “Objectionable Conditions and Management’s Response.” Submit the completed form as an EIR attachment. RETORT NO.TYPE OF RETORT Vertical Horizontal LENGTH OR HEIGHTDIAMETER NUMBER OF BASKETS OR CRATES PER RETORT: FOR VERTICAL RETORTS, BOTTOM CRATE SUPPORTS ARE PRESENT TO PROTECT THE STEAM SPREADER. (SHALL REQUIREMENT – 113.40(b)(6)) COMMENTS: ARE BAFFLE PLATES PRESENT IN THE BOTTOM OF THE RETORT? (BAFFLE PLATES SHALL NOT BE USED – 113.40(b)(6).) COMMENTS: ARE VERTICAL RETORTS EQUIPPED WITH CENTERING GUIDES TO PROVIDE A 1.5-INCH CLEARANCE BETWEEN THE SIDE WALLS OF THE RETORT AND THE CRATE? (SHOULD REQUIREMENT – 113.40(b)(6)) COMMENTS: ARE THERE ANY PROTRUSIONS INSIDE THE RETORT OR THE RETORT DOOR CASING THAT COULD DAMAGE CONTAINERS DURING LOADING/UNLOADING OF CRATES? COMMENTS: PSC Publishing Services (301) 443-6740 EF PROCESSING IN WATER IN STILL RETORTS (Retort Survey) DEPARTMENT OF HEALTH AND HUMAN SERVICES FOOD AND DRUG ADMINISTRATION .No Yes . YesNo . No Yes .No Yes |
| Navigation | Previous Page / Next Page |
| Following Datasheets | UCM071587_1 (11 pages) UCM071605_1 (8 pages) UCM071615_1 (11 pages) UCM071640_1 (7 pages) UCM071653_1 (11 pages) UCM071661_1 (11 pages) UCM071670_1 (7 pages) UCM071977_1 (6 pages) UCM072017_1 (1 pages) UCM072080_1 (1 pages) |
Check in e-portals |
World-H-News Products Extensions Partners Automation Jet Parts |
| Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |
