Specifications | National Type Evaluation Technical Committee J. Barber |
Business section |

Specifications | National Type Evaluation Technical Committee J. Barber |
Business section |
Specifications | National Type Evaluation Technical Committee J. Barber |
Outline | Table of Contents - Interim Agenda National Type Evaluation Program (NTEP) Committee Interim Agenda Appendix A. National Type Evaluation Technical Committee (NTETC) Grain Analyzer Sector Meeting Summary 1. Report on the 2010 NCWM Interim and Annual Meetings 2. Report on NTEP Type Evaluations and On-going Calibration Program (OCP) (Phase II) Testing 3. Review of Ongoing Calibration Program (Phase II) Performance Data 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers 8. Report on OIML TC17/SC1 R59 “Moisture Meters for Cereal Grains and Oilseeds” 9. Report on OIML TC 17/SC 8 “Protein Measuring Instruments for Cereal Grain and Oil Seeds” 10. Standardization of Grain Moisture Meters – Traceability of GMMs used in Meter to Like-Meter testing. 11. Air-Oven Collaborative Study – Analysis of results 12. Proficiency Testing 13. Time and Place for Next Meeting 14. Future Direction of Moisture Measurement Technology |
Suggested Link Details/Purchase | |
Content | NTEP 2011 Interim Agenda Appendix A – NTETC Grain Analyzer Sector NTEP - A24 Sector chair, Ms. Eigenmann, asked Ms. Johnson to put together a formal proposal based on the above criteria. Ms. Johnson will contact all those on the GA Sector mailing list as well as those on the NIST/WMD list of state W&M officials interested in grain moisture with details of the proposed program. 13. Time and Place for Next Meeting The next meeting is tentatively planned for Wednesday, August 24 and Thursday, August 25, 2011, at the Chase Suites by Woodfin at Kansas City International Airport in Kansas City, Missouri. Sector members are asked to hold these days open pending determination of agenda items, exact meeting times, and meeting duration. Final meeting details will be announced by early June 2010. If you would like to submit an agenda item for the 2011 meeting, please contact any of the following persons by June 1, 2011: Mr. Jim Truex, NTEP Administrator at jim.truex@ncwm.net Ms. G. Diane Lee, NIST Technical Advisor, at diane.lee@nist.gov Mr. Jack Barber, Co-Technical Advisor, at barber.jw@comcast.net 14. Future Direction of Moisture Measurement Technology The Grain Inspection Advisory Committee (GIAC) meets twice annually to advise GIPSA on the programs and services it delivers under the U.S. Grain Standards Act. Recommendations by the committee help GIPSA to better meet the needs of its customers who operate in a dynamic and changing marketplace. The committee is comprised of 15 members and 15 alternate members appointed by the Secretary of Agriculture. Committee members and alternates represent all segments of the grain industry. They include grain producers, processors, merchandisers, handlers, exporters, consumers, grain inspection agencies, and scientists. Committee members serve without compensation, but are reimbursed for travel expenses. Meetings typically follow a format of a day of presentations followed by a morning during which committee members digest the material they have heard to produce resolutions addressing the significant issues. The resolutions are subjected to a vote by the committee. Those that are adopted are taken seriously by GIPSA’s administer in considering how to respond to these resolutions. On June 16, 2010, Dr. Funk, GIPSA/FGIS Associate Director for Methods Development, made a presentation to the GIAC entitled, “Future Direction of Moisture Measurement Technology.” He repeated this presentation on August 26, 2010, at the NTETC Grain Analyzer Sector meeting in Kansas City, Missouri. Following is a digest of Dr. Funk’s presentation. In November of 2009 the GIAC approved the following resolution: The Advisory Committee recommends that GIPSA evaluate the current moisture calibration for high moisture rough rice for accuracy when compared to the air oven reference. The FGIS Annual Calibration Study was already doing this. Each year approximately 1100 samples are collected to evaluate and enhance official moisture meter accuracy. For 15 major grains, all NTEP-certified models are tested with the same set of grain samples. Grain calibrations are optimized to the most recent three years of data with consideration of abnormal conditions. To minimize “hunting”, calibrations are changed only if certain error thresholds are exceeded, but there are problems. The long gain rough rice accuracy for 2007 - 2009 crops shows a large scatter above 20 % moisture and for 2009 a very strange pocket of data between 14 % and 17 % moisture with significant negative bias. Similar problems appeared in corn. The crop year 2009 was a year of extremely low quality and low test weights. Many samples were well under 50 pounds per bushel. The conclusions reached from the 2009 crop calibration study revealed: |
Navigation | Previous Page / Next Page |
Suggested Link Details/Purchase | |
Following Datasheets | 10-ntep-app-a-grain-10-annual-final (30 pages) 10-ntep-app-b-09-annual-final (38 pages) 10-ntep-app-b-11-annual-final (46 pages) 10-ntep-app-b-11-pub15-final (46 pages) 10-ntep-app-b-meas-10-annual-final (96 pages) 10-ntep-app-c-09-annual-final (51 pages) 10-ntep-app-c-11-annual-final (30 pages) 10-ntep-app-c-11-pub15-final (30 pages) 10-ntep-app-c-weigh-10-annual-final (32 pages) 10-ntep-app-d-09-annual-final (20 pages) |
Check in e-portals![]() |
World-H-News Products Extensions Partners Automation Jet Parts |
Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |