| Specifications | Microsoft Word - 10-100RV-S _097_ Rev E .doc mstearns |
| Business section |
|
|
|
|
|
||||||||||||||||||||||||||||||||||
|
|
|
|
|
||||||||||||||||||||||||||||||||||
| Specifications | Microsoft Word - 10-100RV-S _097_ Rev E .doc mstearns |
| Business section |
| Specifications | Microsoft Word - 10-100RV-S _097_ Rev E .doc mstearns |
| Suggested Link Details/Purchase | |
| Content | USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing. Model 10-100RV-S Typical Performance: Power De-rating: Mounting Footprint and Procedure: NOT RECOMMENDED APPLICATION BOARD LOWER THAN LEAD.THAN LEAD. BOARD HIGHER SCALE: NONESCALE: NONE BOARD EVEN WITH LEAD.THAN LEAD. BOARD LOWER SUGGESTED STRESS RELIEF METHODS (2 PLACES) .025 MIN. SUGGESTED MOUNTING PROCEDURES: 1.MAKE SURE THAT THE DEVICES ARE MOUNTED ON FLAT SURFACES (.001 UNDER THE DEVICE) TO OPTIMIZE THE HEAT TRANSFER. DRILL & TAP THE HEATSINK FOR THE APPROPRIATE2. THREAD SIZE TO BE USED. 3.COAT HEATSINK WITH A MINIMUM AMOUNT OF HIGH QUALITY SILICONE GREASE (.001 MAX. THICKNESS). 4. POSITION DEVICE ON MOUNTING SURFACE & SECURE USING SOCKET HEAD SCREWS, FLAT & SPLIT WASHER.TORQUE SCREWS TO THE APPROPRIATE VALUE. MAKE 5. SURE THAT THE DEVICE IS FLAT AGAINST THE HEATSINK. (CARE SHOULD BE TAKEN TO AVOID UPWARD PRESSURE OF THE LEADS TOWARDS THE LID). SOLDER LEADS IN PLACE USING APPROPROATE SOLDER WITH A CONTROLLED TEMPERATURE IRON. ** FOR MORE DETAILS CONTACT FACTORY ** 10-100RV-S (097) Rev E |
| Navigation | Previous Page / Next Page |
| Following Datasheets | 10-2-1 (1 pages) 10-2_1 (2 pages) 10-2000-GUNARAJ-s (9 pages) 10-2000-MATSUSHITA-s (9 pages) 10-2000-MOON-s (8 pages) 10-2000-NELSON-s (11 pages) 10-2002-HUANG-s (12 pages) 10-2002-VIANCO-s (10 pages) 10-2002-XIE-s (8 pages) 10-2003-COLLINS-s (8 pages) |
Check in e-portals |
World-H-News Products Extensions Partners Automation Jet Parts |
| Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |
