National Type Evaluation Technical Committee J. Barber

We use cookies to personalise content and ads, to provide social media features and to analyse traffic. We share info about use of our site with social media, ads and analytics partners. By continuing to browse you are agreeing to use of cookies. See details or close this message.

Page

/28

100%

Specifications	National Type Evaluation Technical Committee J. Barber
Business section

NTEP 2011 Interim Agenda Appendix A – NTETC Grain Analyzer Sector NTEP - A14 Software with closed shell (no access to t

Specifications	National Type Evaluation Technical Committee J. Barber
Outline	Table of Contents - Interim Agenda National Type Evaluation Program (NTEP) Committee Interim Agenda Appendix A. National Type Evaluation Technical Committee (NTETC) Grain Analyzer Sector Meeting Summary 1. Report on the 2010 NCWM Interim and Annual Meetings 2. Report on NTEP Type Evaluations and On-going Calibration Program (OCP) (Phase II) Testing 3. Review of Ongoing Calibration Program (Phase II) Performance Data 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers a. Identification of Certified Software b. Software Protection / Security c. Software Maintenance and Reconfiguration 4. Report on New GIPSA/NIST Interagency Agreement for 2010 – 2014 5. Item 310-1 G-S.8. Provision for Sealing Electronic Adjustable Components, G-S.8.1., Adjustment Mode Indication, and Definitions for Adjustment and Adjustment Mode 6. Item 310-3 G-S.1. Identification. – (Software) 7. Other Software Requirements That May Impact Grain Analyzers 8. Report on OIML TC17/SC1 R59 “Moisture Meters for Cereal Grains and Oilseeds” 9. Report on OIML TC 17/SC 8 “Protein Measuring Instruments for Cereal Grain and Oil Seeds” 10. Standardization of Grain Moisture Meters – Traceability of GMMs used in Meter to Like-Meter testing. 11. Air-Oven Collaborative Study – Analysis of results 12. Proficiency Testing 13. Time and Place for Next Meeting 14. Future Direction of Moisture Measurement Technology
Suggested Link Details/Purchase
Content	NTEP 2011 Interim Agenda Appendix A – NTETC Grain Analyzer Sector NTEP - A14 Software with closed shell (no access to the operating system and/or programs possible for the user) Check whether there is a complete set of commands (e.g. function keys or commands via external interfaces) supplied and accompanied by short descriptions Yes No N/A Check whether the manufacturer has submitted a written declaration of the completeness of the set of commands Yes No N/A Operating system and / or program(s) accessible for the user: Check whether a checksum or equivalent signature is generated over the machine code of the metrologically significant software (program module(s) subject to legal control W&M jurisdiction and type-specific parameters) Yes No N/A Check whether the metrologically significant software will detect and act upon any unauthorized alteration of the metrologically significant software using simple software tools e.g. text editor. Yes No N/A Software interface(s) Verify the manufacturer has documented: the program modules of the metrologically significant software are defined and separated Yes No N/A the protective software interface itself is part of the metrologically significant software Yes No N/A the functions of the metrologically significant software that can be accessed via the protective software interface Yes No N/A the parameters that may be exchanged via the protective software interface are defined Yes No N/A the description of the functions and parameters are conclusive and complete Yes No N/A there are software interface instructions for the third party (external) application programmer. Yes No N/A Software Sector Discussion: The labs again indicated they had not had a chance to utilize the checklist. The list was reviewed and some minor modifications to the checklist text were incorporated as shown above. Software Sector Conclusion: Work is ongoing on this item with the intent that it eventually be incorporated as a checklist in Pub 14; again the labs are requested to try utilizing this checklist for any evaluations on software-based electronic devices. c. Software Maintenance and Reconfiguration Background: The Software Sector agreed that the two definitions below for update and Traced update were acceptable. Verified Update: A verified update is the process of installing new software where the security is broken and the device must be re-verified. Checking for authenticity and integrity is the responsibility of the owner/user. Traced Update: A traced update is the process of installing new software where the software is automatically checked for authenticity and integrity, and the update is recorded in a software update log or audit trail. The Software Sector also worked towards language proposed for defining the requirements for a Traced Update (currently considered as relevant for Pub 14):
Navigation	Previous Page / Next Page
Following Datasheets	10-ntep-app-a-grain-10-annual-final (30 pages) 10-ntep-app-b-09-annual-final (38 pages) 10-ntep-app-b-11-annual-final (46 pages) 10-ntep-app-b-11-pub15-final (46 pages) 10-ntep-app-b-meas-10-annual-final (96 pages) 10-ntep-app-c-09-annual-final (51 pages) 10-ntep-app-c-11-annual-final (30 pages) 10-ntep-app-c-11-pub15-final (30 pages) 10-ntep-app-c-weigh-10-annual-final (32 pages) 10-ntep-app-d-09-annual-final (20 pages)
Check in e-portals	World-H-News Products Extensions Partners Automation Jet Parts
Sitemap Folder	group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder