Specifications | SSPA 2.7-3.5-40 DS_SSPA 2.7-3.5-40 DS.qxd terri |
Business section |
|

Specifications | SSPA 2.7-3.5-40 DS_SSPA 2.7-3.5-40 DS.qxd terri |
Business section |
|
Specifications | SSPA 2.7-3.5-40 DS_SSPA 2.7-3.5-40 DS.qxd terri |
Suggested Link Details/Purchase |
|
Content | Aethercomm P/N SSPA 2.7-3.5-40 is a high power, S Band, Solid State Power Amplifier that operates from 2.7 to 3.5 GHz. The peak output power at 25C is 40 watts typical with a 200uSec pulse width at a 10% duty cycle. Minimum small signal gain is 37 dB. Noise Figure is 7 dB typical at 25C. Input VSWR is 2.0:1 maximum. Output VSWR is 2.0:1 maximum. This unit is equipped with Aethercomm s proprietary DC switching circuitry that enables and disables the DC- DC circuitry in 600 nSec typical on this unit. Standard features include reverse polarity protection, output short and open circuit protection, and an integrated DC-DC converter with over/under voltage protection. This power amplifier operates from a +12 Vdc power supply with a class A bias of typically 12 amps. This amplifier operates from -40C to +65C base plate temperature. This SSPA is ideal for S band radar systems that require high reliability and high power in a rugged Aethercomm, Inc.3205 Lionshead Avenue |Carlsbad, CA 92010 |Tel 760.208.6002 Fax 760.208.6059 |Web: www.aethercomm.com |email: sales@aethercomm.com High Power, Broadband, S Band Solid State RF Amplifier •Operation across 2.7 to 3.5 GHz min •40 watts peak output power typ •37 dB min small signal gain •High speed DC switching circuitry •7 dB noise figure typical Solid State Pulsed Power Amplifier Typical Performance from 2.7 to 3.5 GHz @ 25C ParameterMinTypMax Saturated Gain (dB)3740- Saturated Gain Flatness (dB)+/-1.0+/-2.0- Peak Output Power (dBm)45.046.048.0 Pulse Width (uSec)-2001000 Duty Cycle (%)-10100 Input Return Loss (dB)-20.0-11.0-9.8 Output Return Loss (dB)-20.0-12.0-9.8 Noise Figure (dB)5710 Supply Voltage (Vdc)11.512.012.5 Quiescent Current Class A Bias (Amps)11.012.014.0 Harmonics (dBc)-50-30 DC Switching On/Off Time (nSecs)3006001000 and compact module. Standard housing size is approximately 4.0 X 8.0 X 1.0 inches. Mounting is accomplished via through holes in the housing. An SMA female connectors is standard on the RF input port. An SMA female connector is standard on the out- put port. DC connections are accessible via a DC feed through capacitors. This is an example of an Aethercomm standard product. Aethercomm designs and manufactures high performance, high power CW or pulsed SSPA s for commercial, military and satellite communications customers. Aethercomm Inc. reserves the right to make changes without further notice. Aethercomm recommends that before these items herein are specified into a system or critical application that the performance characteristics be verified by contacting the factory. |
Following Datasheets | 322_1 (1 pages) 322001 (1 pages) 322005 (1 pages) 322208 (1 pages) 322218 (1 pages) 322401 (1 pages) 322402 (1 pages) 322868 (1 pages) 323_2 (27 pages) 324_2 (4 pages) |
Check in e-portals![]() |
World-H-News Products Extensions Partners Automation Jet Parts |
Sitemap Folder | group1 group2 group3 group4 group5 group6 group7 group8 group9 group10 group11 group12 group13 group14 group15 group16 group17 group18 group19 group20 group21 group22 group23 group24 group25 group26 group27 group28 group29 group30 group31 group32 group33 group34 group35 group36 group37 group38 group39 group40 group41 group42 group43 group44 group45 group46 group47 group48 group49 group50 group51 group52 group53 group54 group55 group56 group57 group58 group59 group60 group61 group62 group63 group64 group65 group66 group67 group68 group69 group70 group71 group72 group73 group74 group75 group76 group77 group78 group79 group80 group81 group82 group83 group84 group85 group86 group87 group88 group89 group90 group91 group92 group93 group94 group95 group96 group97 group98 group99 group100 Prewious Folder Next Folder |